Site Secured by WorldPay
Subaru Impreza "Monte Carlo '99" - 1/10th scale 4wd rally car kit (TT-02 chassis)
Part No: TAM58631
Stock Level: 1
Rally Legend on the TT-02
The 1999 version of the two-door Subaru Impreza rally car was a highly balanced beast, with 4-cylinder turbocharged all-aluminium boxer engine, a drive-by-wire throttle and semi-automatic 6-speed transmission. This R/C model assembly kit recreates the Impreza from the year's opening rally in Monte-Carlo, with the form faithfully depicted in durable polycarbonate, and separate parts used to recreate rear wing and side mirrors. Stickers are included to recreate the multitude of team and sponsor logos. The model runs on the adaptable TT-02 chassis, which is equally at home on road and flat dirt surfaces.
TT-02: Adaptable, balanced shaft driven 4WD
The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. Gold colour fin-spoke wheels are paired with rally block tires.
- Length: 442mm, Width: 186mm, Height: 140mm
- Wheelbase: 257mm
- Tire Width/Diameter: 27/69mm (Front & Rear)
- Bathtub-type Frame
- Shaft-Driven 4WD
- Front/Rear 4-Bevel Resin Differentials
- 3-Piece Steering Tie-Rod
- 4-Wheel Double Wishbone Suspension
- Front/Rear Friction Dampers
- Gear Ratio = 9.58:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions)
- Type 540 Motor
- Electronic Speed Controller (ESC) included
Required for completion; 2 Channel Radio System, 1 Servo, Battery and Charger, Polycarbonate Paint for the Body, Tools for assembly.
The new TT-02 customizable chassis offers drivers the chance to completely personalize their model from wheelbase length to body design.
The 4-wheel independent double wishbone suspension features friction dampers and uses identical L/R suspension arms and uprights for ease of assembly and maintenance.70T spur gear and 22T pinion gear fitted as standard. The motor and the battery are longitudinally-placed in the ABS resin chassis for excellent balance.
Brake disc-shaped wheel hubs further add to the chassis highly realistic appearance.
Fully-enclosed front and rear gearboxes are fitted with 4-bevel differential gears.
Bathtub-type frame features skid-shaped underside to reduce contact with the track surface during cornering.
Receiver case protects from dust.