Site Secured by WorldPay
Wing drilling jig (for Hot Bodies wing)
Part No: AV10058
Stock Level: -
- Perfectly space your pilot holes with either 3 or 2 holes per section depending on the downforce you want.
- Includes a 2mm drill bit for the pilot hole.
- If you don't have a drill, use a piston drill bit and then a reamer.
- For making the larger hole we recommend a 1/4in (6.35mm) drill bit because they are common (this is what was used in the photo).
- 3D printed, so try to drill straight, but it is quite resilient.